Problem Solvers
Ultrasonic Face Cleansing & Anti-Aging Serum Activator
Sku: 5425
$50
$75

This product is in stock


Share with your friend

Ultrasonic Face Cleansing & Anti-Aging - Skin Spatula
The ISOMERS® Ultrasound Face Cleansing and Anti-Aging System provides one of the highest levels of skin cleansing and nourishing capabilities to the beauty enthusiast.
This unique ultrasonic system vibrates at 24,000 vibrations per second to penetrate deeply into the layers of the skin to help deep cleanse the skin.

Exfoliate, Purify, Infuse & Nourish - for a healthier skin and complextion
Benefits of Ultrasonic Skin Scrubber:

    Improves the appearance of Acne.
    Removes Blackheads.
    Diminishes Fine Lines and Wrinkles.
    Improves Collagen and Elastin production for Firming and Tightening.
    Allows for Deeper Penetration of Skin Care Creams and Serum Products.

Every day, new skin cells are formed at the bottom layer of the epidermis to replace the skin cells we shed from the top layer. The upper layers of the epidermis are often clogged with dirt, oil, and dead skin cells, causing the skin to lose radiance and appear dull. Ultrasonic skin scrubbers(often referred to as "skin scrubbers" or "skin spatulas") use ultrasound waves to speed up the natural exfoliation process, loosening and removing this oil, dirt, and other cellular debris from the pores on the surface of the skin.

 Device maintenance and care

  • This unit is intended for external use only.
  • This unit is only for its intended purpose (beauty care).
  • Do not immerse the unit, cable or charger in water.
  • This unit may be cleaned by wiping with a soft damp cloth.
  • Dry thoroughly before storage.
  • Do not use solvents or detergents to clean the unit

Directions for use

  • Turn the unit on/off
  • Press power button (fig. 1, #5) once briefly and the unit will beep
  • once and turn on. All three lights will glow red and blink slowly.
  • Briefly press the power button to cycle through the various modes.

Exfoliate Skin
Exfoliate the skin once a week to help clear away dead skin and
free pores of dirt and blackheads.

Recommended procedure:

• Before first use, remove clear plastic which covers the stainless
steel tip and charge the unit for at least 3 hours.
• Clean the skin with a cleanser to remove makeup and oil.
• Wet the skin with water or an ISOMERS® cleanser. The skin
should be thoroughly wet to ensure that the tip of the spatula
glides smoothly across the skin.
• Turn on the unit by briefly pressing the power button (fig. 1, #5).
Briefly press the power button a second time to enter the
Exfoliate mode. Both the Power and Exfoliate lights will appear
steady red.
• Gently move the curved end of the spatula in an upward motion
across the face with the spatula pointing downwards (fig. 3).
• The appearance of a fine mist at the edge of the spatula means
the unit is working properly and your face is wet enough. If your
facial skin dries before you get to it, please re-apply more water
or cleansing solution.
• The unit will beep five times and turn itself off after 10 minutes
of use. If you wish to continue, simply turn the unit on and select
the exfoliation mode to continue.
• After completion of the treatment, turn the system off by
pressing and holding the power button until it beeps 5 times and
then turns off.
• Clean the spatula with a soft damp cloth.

Purify Skin
You can purify your skin on a daily basis to help clear away
impurities that are encapsulated within its deeper layers.

Recommended procedure:
• Before first use, remove clear plastic which covers the stainless
steel tip and charge the unit for at least 3 hours.
• Clean the skin with a cleanser to remove makeup and oil.
• Wet the skin with water or an ISOMERS® cleanser. The skin
should be thoroughly wet to ensure that the tip of the spatula
glides smoothly across the skin.
• Turn on the unit, by briefly pressing the power button (fig. 1, #5).
Briefly press the power button three times to enter the Purify
mode. Both the Power and Purify lights will appear as steady red.
• Gently move the curved end of the spatula (fig. 4) in a
downward motion across the face with the spatula pointing
upwards.
• If your facial skin dries before you get to it, please re-apply more
water or cleansing solution.
• The unit will beep five times and turn itself off after 10 minutes
of use. If you wish to continue, simply turn the unit on and select
the exfoliation mode to continue.
• After completion of the treatment, turn the unit off by pressing
and holding the power button until it beeps 5 times and then turns
off.
• Clean the spatula with a soft damp cloth.
• Enjoy your cleaner, healthier skin.


Infuse and Stimulate the Skin
Infuse and stimulate up to three times per week using pulsed
ultrasonic vibration to help stimulate the dermal layers and
optimize the infusion of anti-aging creams.


Recommended procedure:
• Before first use, remove clear plastic which covers the stainless
steel tip and charge the unit for at least 3 hours.
• Clean the skin with a cleanser to remove makeup and oil.
• Wet the skin with water or simply apply your favorite ISOMERS®
anti-aging cream. For best results, the skin should be thoroughly
wet to ensure that the tip of the spatula glides smoothly across
the skin.
• Turn on the unit, by briefly pressing the power button (fig. 1, #5).
Press the power button briefly two times to enter the Infuse
mode. The Power light will appear steady red, while the Infuse
light will be blinking red.
• Gently move the spatula (fig. 4) in a downward motion across
the face with the curved end of the spatula pointing upwards.
• If your facial skin dries before you get to it, please re-apply more
water or anti-aging cream.
• The unit will beep five times and turn itself off after 10 minutes
of use. If you wish to continue, simply turn the unit on and select
the infuse mode to continue.
• After completion of the treatment, turn the system off by
pressing and holding the power button until it beeps 5 times and
then turns off.
• Clean the spatula with a soft damp cloth.
• Enjoy your refreshed and younger looking skin.

Nourish Skin
You can nourish and rejuvenate your skin on a daily basis using
ultrasound and ionic charge.


Recommended procedure:
• Before first use, remove clear plastic which covers the stainless
steel tip and charge the unit for at least 3 hours.
• Clean the skin with a cleanser to remove makeup and oil.
• Apply your favorite ISOMERS® serum. The skin should be
thoroughly wet to ensure that the tip of the spatula glides
smoothly across the skin.
• Turn on the system, by briefly pressing the power button (fig. 1,
#5). Press the power button briefly four times to enter the Nourish
mode. The Power light will appear steady red, while the Nourish
light will be blinking red.
• Gently move the spatula (fig. 4) in a downward motion across
the face with the curved end of the spatula pointing upwards.
• If your facial skin dries before you get to it, please re-apply more
anti-aging serum or water.
• The unit will beep five times and turn itself off after 10 minutes
of use. If you wish to continue, simply turn the unit on and select
the Nourish mode to continue.
• After completion of the treatment, turn the unit off by pressing
and holding the power button until it beeps 5 times and then turns
off.
• Clean the spatula with a soft damp cloth.
• Enjoy your refreshed and younger looking skin.

is/so/me

A skincare community that listens to you. United by stories, strengthened by voice. Because at Isomers, we’re all in it together.

DISCOVER OUR PROCESS